37 posts tagged with "Quote Tools"

In-Person opens from the Installer Portal sidebar in a new tab so you can find a contact, open their quote types, and run the same quote tools in a focused layout without the main sidebar. Add and edit contact addresses with the same address card used elsewhere: multiple addresses, a clear primary, and lookup or manual entry where your account allows it. Contact breadcrumbs show the person’s name instead of an internal id.

The Residential Battery Quote Tool uses the new step-by-step journey for every account. Your customer sees tariff and battery-size recommendations, clearer electricity bill and tariff steps, and illustrative “why a battery” examples before they choose a package. Solar, commercial solar, and battery savings sections can play through a typical day with animated energy flows. AI helpers that analyse text or files in the Installer Portal work again after a model update.

When your customer does not have an EPC, heat pump and boiler quote tools now fill house details from the same building data source used for solar. You may see different floor counts, building age, and heat-loss sizing on some addresses, especially flats and older properties.

Battery quotes on Octopus Flux and other time-of-use tariffs model grid charging and evening arbitrage more closely to how those tariffs work, so typical-day charts and annual savings update when you save or rebuild the quote. When export income is zero, you still see headline savings and the monthly breakdown alongside the arbitrage table.

New roof sections in solar quote tools start with smaller default clearances, and hardware packages that use dynamic images can show your additional photos in a carousel.

You can see where a quote is pinned on the map from the Installer Portal and, in the roof editor on satellite view, turn on an optional property pin. Battery quotes that charge from the grid on a time-of-use tariff get more realistic savings when you save or rebuild the quote, and the Advanced typical-day chart shows battery level through the day.

Your customer's quote no longer says return on investment or ROI. That step is Savings over time. The year-one percentage is Year 1 savings rate. On the same savings step, the top card is Headline savings, so it reads separately from the before and after sections.

On residential and commercial solar quotes, generation was piled into the summer months, so winter looked far too low and summer export looked very high. The yearly generation total was already right. Save the quote and the months are worked out again. Opening a quote without saving leaves the old months in place.

On a solar quote with no roofs drawn yet, Roof configuration opens on the property. It no longer zooms in on a neighbouring building at the edge of the satellite image.

Instant quotes and proposals use Settings for contact, address, and project linking. Pricing models can add Product surcharges on catalogue lines. Residential and commercial solar quotes ask for annual consumption first on the electricity bill step, with a quick cost check and clearer rules when EV or heating loads exceed the total.

New residential solar quotes walk through how the household uses power, the roof, packages, tariffs, and savings. Quotes already in progress can still be finished when they had reached hardware packages. Projects and My Tasks are in the sidebar, marked Beta, and you can offer more than one way to accept a quote or proposal.

You can add BCC addresses under Customer-Facing Email Settings so a copy of every branded email to your customer also goes to a CRM or shared inbox. Login codes are not copied. Heat pump, boiler, air con, and battery start pages also show Why choose us when you already had those cards but they were missing from Custom blocks.

You can add a Footer business details block to proposals and to the heat pump, boiler, air con, battery, and commercial solar quote tools. It shows your logo and the contact methods you already set in Business details. Coverage areas decline an out-of-area address on those start pages again, before a quote is created.

The Heat Pump, Boiler, Air Con, and Battery Quote Tools now work the same way as the Commercial Solar Quote Tool. Your customer starts with an address, confirms each section on one scrolling page, and keeps a PDF that matches what they saw. The Solar Quote Tool is unchanged. You can also import more than one Spruce Eco design onto a proposal, and set your own room sizes on the Air Con Quote Tool.

A proposal can now carry more than one payment schedule, so the deposit and the stage split can differ depending on which finance option your customer picks. Contacts hold as many addresses as you need, each with its own map pin. The Hardware Catalogue has been rebuilt underneath: two people can work in it at the same time without overwriting each other, and deleting or archiving anything now tells you what it is used in before it goes. Two fixes are worth knowing about: the Savings step in the Heat Pump Quote Tool could fail for your customer on some accounts, and turning off a package price override did not put the calculated price back.

Designing a roof layout in the Solar Quote Tool and Commercial Solar Quote Tool takes fewer clicks and is easier to correct. The editor now opens zoomed to the roofs you have drawn, the draw tools stay on screen while something is selected, and you can undo a mistake instead of redrawing.

The coverage areas you draw in Business Details now apply to every quote tool, not just solar, so an address outside your area is declined at the address step before a quote starts. Alongside that, the labels popup stays on screen on a narrow window, the date range picker on your Dashboard fits two calendars, and you can change who a proposal is prepared by again.

Most of the product looks different. Text fields, dropdowns, checkboxes, buttons, address lookups and almost every popup have been rebuilt to one consistent design, across the quote tools your customers use, the proposal editor, the Installer Portal, and the forms your customers complete when they accept. Nothing has moved in the sidebar, and quoting, pricing and CRM behaviour are unchanged. Two things do change underneath the new look: your team can send proposal and quote emails from their own address, and OpenSolar imports no longer arrive without roofs.

Quoting a large commercial array is fixed in three places. Choosing inverters no longer times out on arrays of several hundred panels. A battery package that cannot be matched to a battery now falls back to inverters instead of quoting panels alone. And automatic battery sizing no longer comes back as zero on sites that generate far more than they use.

If you sell a battery that builds up in modules, you can now model it the way it is actually assembled. Four product types cover the parts of a stack, the package sets how many modules sit on each master, and the Solar, Commercial Solar and Battery Quote Tools size the stack to the capacity they need — adding a whole extra stack when one is not enough.

Drawing a roof away from a desktop is closer to the full experience. The action menus stack when space is tight instead of clipping their labels or covering the zoom controls, editor buttons keep their size on iPhone and iPad, and closing a roof you are part-way through drawing takes fewer attempts.

On a phone, the steps of the Commercial Solar Quote Tool now sit behind a menu that opens as a sheet, and a progress bar shows your customer how far through they are. Roofs are always drawn by hand: the tool no longer scans the property and draws the first roof for them.

Running a quote on a phone or tablet now behaves much more like it does on a laptop. The drawing canvases fill the screen and respond to pinch zoom on iPhone and iPad, number fields accept decimals, and headings and spacing scale down so less of the page is wasted.

The Return on investment step of the Commercial Solar Quote Tool now looks like the savings charts either side of it, and reads in calendar years rather than years from now. The energy flow diagrams that show electricity moving between grid, solar, battery, and building have been redrawn to match.

The charts your customers see in the Commercial Solar Quote Tool have been redrawn. The monthly and typical day energy charts each have a Standard and an Advanced view, the tables and charts behind each section are grouped rather than stacked down the page, and the long-term bill comparison is now a line chart.

The emails your team receives when a quote, proposal, or service plan agreement moves have been rebuilt. Details are grouped into labelled sections, fields with nothing in them are left out rather than printed as "Not provided", and quote notifications now say whether the quote was built by your customer or by someone in the Installer Portal. Nothing your customers receive has changed.

The Commercial Solar Quote Tool is now something you can have added to your account. Alongside it, battery packages built around an all-in-one inverter-battery can grow with expansion packs instead of a second unit, there is more you can say about a package before your customer picks one, and proposals gain an accreditation cards block.

You now decide how the Boiler Quote Tool sizes the packages it builds. System and regular boilers are set up separately from combi boilers, and each can be sized as a percentage of the property's heat loss or from a table of heat loss bands. Hot water flow requirements for combi packages are unchanged and still apply on top of the heating sizing.

July went to the numbers your customers see. The Boiler Upgrade Scheme oil and LPG uplift is always applied now, and solar output figures follow the panel wattage of the package your customer picks. Heat pump proposals gained a floor-plan view of which emitters change in which rooms, Proposals came out of beta, and Cal.com joined the connectors.

June changed how you get around and how heat pump work reads. The Installer Portal and the Customer Portal both have new navigation, Theme now sets one set of colours and corner radii for every app instead of a different set per screen, and quotes and proposals can carry labels. Heat pumps got the deepest work: running-cost savings cover oil, LPG and electric heating, and an imported Spruce Eco survey builds a redrawn technical section of a proposal.

May shortened two things that had grown long: the boiler journey your customer walks through, and the amount of hand-work in a proposal. Boiler quotes now cover the current and the new boiler in one step each, wizard imports can land in a proposal you are already editing, and the CRM connectors stopped raising records for people who have only picked a package.

April joined quotes and proposals up. A solar, heat pump, boiler or air con quote becomes a proposal from the quote itself and brings blocks built from that quote with it, and proposals also learned to stage payments, total themselves up at the end and be reordered by dragging. The listings you work from filter harder — several statuses at once on Instant Quotes and Proposals, and by quote tool on your catalogue and packages — and Promo Codes are Discount Codes throughout, including the box your customer types into.

March went to proposals. You can start one from instant quotes you have already produced, price it with blocks that pull hardware straight from your catalogue, and set out the property, its EPC and the grants on offer without writing any of it by hand. Acceptance moved too: every quote tool now has a single Acceptance screen in place of the old Deposit and Calendar screens.

February adds a quote tool for boiler replacements, built the same way as the rest: your customer answers questions about their property, picks a package and leaves their details. Proposals pick up the two things that made them awkward for solar work — you can build one from an instant quote you have already run, and your customer can choose a finance option and see the repayments. Your Hardware Catalogue also learns to read products out of manufacturer datasheets.

December is the month proposals became something you can find. Proposals now appears in the Installer Portal marked Beta, and you can build one from an Easy PV project instead of from scratch. Underneath it sit a pricing table you assemble line by line, followers so your colleagues get the notifications too, and a layout that holds up on a phone.

Proposals took most of the month. You can price a proposal from a list of line items, show the yearly savings and the return on them, and open with a proper cover page. Elsewhere, Extras moved out of the individual quote tools into one shared library, and your customers can find their paperwork in folders.

October was mostly about quoting for your customer rather than waiting for them to do it themselves. You can build a quote in the Installer Portal while they are on the phone, change what they see, and send them a link with a message from the person they spoke to. Alongside that, the Solar Quote Tool started reading better roof data from the map, and Pricing Calcs arrived for the times you only need a price.

Proposals became something you can run from end to end this month: assign one to a customer, publish it, share it, and have them accept it in their portal. Finance options moved out of each quote tool into a single list your tools draw from. The Installer Portal also picked up a new sidebar, with quotes grouped under the tool that produced them.